+86-15698999555
中文|English
Home Company
Honor
Products
Case
News
Purchase
Online
Contact us
products

products

Tantalum carbide powder, TaC 

Release time :2020/04/07
Tantalum carbide powder, TaC

海鑫產品介紹.jpg

產品介紹--碳化鉭.png

海鑫COA.jpg

質檢報告--碳化鉭600.png

海鑫XRD.jpg

XRD--碳化鉭600.jpg

海鑫SIZE.jpg

碳化鉭英文_600.png

海鑫數據條.jpg

Tanmlum carbide
The chemical formula is TaC, face-centered cubic lattice.
parameter
Theoretical density is 1.44, melting point is 3730-3830 ° C, coefficient of thermal expansion 

is 8.3×10-6, elastic modulus is 291GPa, coefficient of thermal conductivity is 0.22j /cm·S· C.
Features and USES
Good chemical stability, insoluble in acids. Strong antioxidant capacity. TaC is usually 

synthesized from tantalum pentoxide and carbon black in an inert or reducing atmosphere 

to produce a copper powder. The products with high density and metallic luster can be 

made by hot pressing sintering method. Used as an adjunct to aerospace materials and 

hard alloys.
Tantalum carbide
The nature of the
Light brown metallic cubic crystalline powder, belongs to sodium chloride cubic crystal 

system. Insoluble in water, insoluble in inorganic acids, soluble in mixed acids of hydrofluoric 

and nitric acids and soluble in decomposition. Strong oxidation resistance, easy to be fused 

and decomposed by potassium pyrosulfate. Electrical conductivity is big, has 30 Ω resistance 

at room temperature, superconducting properties.
use
Used in powder metallurgy, cutting tools, fine ceramics, chemical vapor deposition, hard 

wear resistant alloy tools, tools, molds and wear resistant structural components additives, 

improve the toughness of alloy. The sintered body of tantalum carbide shows golden color 

and can be used as an ornament for watches. Tantalum carbide sintered grain growth inhibitor 

is also used to inhibit grain growth, with a density of 14.3g/cm3.

Tantalum carbide and hafnium carbide all belong to the refractory ceramics, means that these 

two materials has an extraordinary heat resistant properties of these two materials is the 

ability of tolerance extreme environment, the potential application of means they are likely 

to include the high speed the shuttle's thermal protection system, and the nuclear reactor 

fuel cladding of super hot environment, however, since has yet to appear in the lab can test 

TaC and HfC melting point of the two kinds of ceramic technology, makes the people it is not 

sure, whether they are really able to work under extreme environmental conditionsTo this end, 

researchers have developed a new type of extreme heating technology, using a laser to test 

the heat resistance of TaC and HfC using this technique, the researchers identified the TaC 

and HfC both elemental and the melting point of the mixture the study recently published in 

Scientific Reports (Scientific Reports) magazine, they found that the mixture of two kinds of 

ceramic (Ta0.8 H2O20C) of the observed melting point consistent with previous research 

results, reached $3905, but the melting point of these two compounds itself is higher than 

the previously foundTaC melting point reached $3768, while HfC is 3958, the researchers 

said the emergence of these two kinds of material, will pave the way for the next generation 

of hypersonic flight vehicle development which means that future spacecraft can become 

faster than ever, the study was Omar, sadie LouSi, Mr Barak (Omar Cedillos Barraza) Dr 

In department of physics at imperial college London, during the PhD of sadie LouSi Mr Barak, 

Dr Is currently associate professor at the university of Texas at el paso, sadie LouSi, Mr Barak,

 "said Dr.When flying at hypersonic speeds in excess of Mach 5, the friction with the air creates 

very high temperatures. Neither TaC nor HfC has been used in hypersonic vehicle development 

to date, but our new findings suggest thatThan we used to think that these two kinds of material 

to heat, in fact they heat resistant performance was more than any other compounds known to 

man means that the fact that they are or can be used for new spacecraft: within the atmosphere, 

the spacecraft can be like ordinary airplane flight, then can in the space at the speed of hypersonic 

flight these two kind of material can make the spacecraft is able to move back and forth between 

the atmosphere under extreme heat generated by the example of TaC and potential use of HfC 

and aircraft nose cap and friction with the outside world the biggest external instruments during 

flightAt the moment, a Mach 5 spacecraft is not yet capable of manned flight, but Dr. Cediloth 

Baraza points out that the dream may well come true in the future. Dr. Cediloth Baraza adds:

Our tests show that the building of the future spacecraft in space, these two kinds of material 

has very big potential of these two kinds of material to withstand such a high temperature extremes, 

this means that one day in the future, manned hypersonic aircraft is really possible if we can fly at 

a speed of Mach 5, then the time of flight from London to Sydney need only about 50 minutes, 

this will bring the world open up gives a pregnant with new business opportunities of the new world.

海鑫技術標準條幅.jpg

柱狀圖.jpg

20200207164708_2743.png

亚洲 图片 另类 综合 小说

    <pre id="wxp7k"></pre>

      <code id="wxp7k"></code><th id="wxp7k"><video id="wxp7k"></video></th>

        <object id="wxp7k"></object>

        <th id="wxp7k"><option id="wxp7k"></option></th><object id="wxp7k"></object>